If you want your nighthawk setup to work on two devices, then this setup guide is for you. You just use the Nighthawk app, it is easier to configure through the app. But for some its still a challenging task to work through the app. This guide is made for regular people who are not that much aware of the tech words. With Nighthawk app you can easily sync your login details and configure nighthawk setup without any hassle.
Start with One Primary Device Using the Nighthawk App
- When you first install the Nighthawk app, always start with one device, be it a phone, laptop or TV. Don’t connect multiple devices at the same time. That’s the first mistake many users make. The app needs a single admin device for the initial login and sync.
- The app is on Google pay. Open the app, follow the steps to configure nighthawk setup and you’ll see the name of your home wifi network there. After that, the app will search for your router automatically.
- After the nighthawk router setup is complete, test the device for connection quality. That confirms the app and router are synced.
Preparing the Second Device
-
- Before touching the second device, make sure your router is still online and the first phone remains connected. Now grab your second phone or tablet. Download the Nighthawk app again from the store.
- When you open the app, don’t press “Set up a new router.” That’s where people go wrong. The second device doesn’t need a fresh nighthawk setup. Instead, choose “Log in.” Enter the same Netgear account you used on the first device.
- Once logged in, the app will recognize that there’s already a router linked to this account. The second device will sync automatically to the existing setup. No need to reset or reconfigure the router again.
- If you get a connection issue, double-check that both devices are connected to the same Wi-Fi or that your router has remote management enabled. You can turn this on through the app settings on your main phone.
Managing Admin and Guest Access with Nighthawk App
Now, it’s important to understand roles. The first device that completes the nighthawk router setup automatically becomes the admin. That device holds all rights to modify settings. The second device works like a shared access device but with limited permissions unless you log in as admin.
If both devices use the same Netgear account, they’ll both have full control. But if one uses a guest account or a different login, that one will only see limited features like connected devices or network speed tests. You can decide which phone handles what. For example, keep your main phone as admin for security and allow your spouse or roommate to use the second phone for monitoring only.
If at any point you forget which device has full control, go to Settings > Admin Device on the app to confirm. The admin device can also revoke or add access. This is handy if you want to remove old phones from the list.
Syncing Data between Devices
When you manage your router on two devices, data sync becomes critical. Changes made on one must reflect on the other. If you have change any attribute like password or anything else then it should show on the second device instantly.
If it has not synced, open the Nighthawk app on the second device, go to Settings, and pull down the screen to refresh it. This quickly syncs it again. If that does not work, then sign out from the second phone, sign back in again, and try it. The nighthawk setup data is saved in your Netgear account. So once you log back in, it tries to re-fetch the latest router settings.
Handling Remote Access
Many people want to control their routers even when they’re away from home. That’s where remote access comes in. Once you’ve enabled Anywhere Access on your main phone, open the Nighthawk app on your second device and check if the remote toggle is active.
If not, go to Settings > Anywhere Access and tap “Enable.” You’ll be prompted to confirm using your Netgear login. Once it’s active, both devices can view connected devices, run speed tests, and restart the router remotely. Just remember: remote access depends on your Netgear account credentials. Don’t share them lightly.
Troubleshooting Common Nighthawk App Errors
Don’t rush the things if it says “router not found” This usually happens when your Wi-Fi changes or if the app loses sync after a firmware update. The fix is simple. Log out from the app on both devices. Restart your router. Then open the app on the admin phone and sign in again.
Don’t forget to check your phones wifi settings if you see “cannot connect to the router message.” The Nighthawk app requires the phone to be on the same network for local access. Switch networks if needed, or use remote management.
During nighthawk router setup, always keep the router powered and avoid pressing the reset button unless something truly breaks. Resetting wipes all paired devices and the nighthawk setup is needed to start from scratch.
Final Checks Before You’re Done
Once both devices are connected and synced, test everything. Change a setting like the Wi-Fi name or password on your main device. Open the second device and check if it reflects the change. If it does, your setup is perfect.
Check for firmware updates too. Updates can sometimes reset remote access permissions, so verify that both devices can still connect after updating.
Also, note that you don’t need to repeat nighthawk setup every time you switch devices. Once the router is paired with your Netgear account, any logged-in device can access it.
Make sure your login credentials stay safe. Anyone with your credentials can technically control your router, so keep them private.
Conclusion
By now you must have a pretty good idea on how to connect two devices to the nighthawk app & how app syncs with your netgear account. Just remember to do the first nighthawk router setup carefully, also, don’t forget to use the same credentials on the second device that you used on the first one.