We are having a problem solution request again and again from a nighthawk device model name: Nighthawk MR1100 M1 router modem. The issue is that whenever user has tried to open nighthawk mobile app, it shows the router network but warns to go out of the app “Nighthawk app conflicts with mobile app”. The reasons can be:
- The Nighthawk app mobile is out of date and needs a quick update.
- MR1100 M1 router does not have anywhere access capability. Need to uninstall the device and reset it.
Now, have a look how to resolve this Nighthawk app conflicts with mobile app issue.
Uninstall Your MR1100 M1 Router Modem
Unplug everything first
Don’t start clicking things while it’s still powered. Pull the SIM card if you had one in there – that’s the tiny one on the side slot. After that power off the device completely (hold the power button down). Now, you should disconnect the battery if it’s the mobile version.
Remove it from your computer/network setup
If you had it plugged into a PC with that USB tether thing, go into your network settings and remove it. On Windows, that’s Control Panel → Network and Internet → Network Connections — look for anything that says “Nighthawk M1” or “RNDIS.” Right-click and hit Disable, then Delete.
On Mac, open System Preferences → Network, click the interface that says “NETGEAR” or “USB Ethernet,” and hit the minus (-) button.
If you used it over WiFi, just forget the network on all your devices. Go to your phone or laptop WiFi settings, find “NETGEAR_M1” or whatever you named it, and hit Forget this network.
Netgear software (Delete all)
In case of that you have used Netgear Mobile App or Netgear Genie, uninstall those.
For Windows: go to Control Panel → Programs → Uninstall a program → find Netgear Mobile or Netgear Genie → uninstall.
For macOS: Drag the app from Applications to the Trash. And then do the process of nighthawk app download again.
That’s it. No hidden drivers or deep registry junk, it’s pretty clean software-wise.
You can now try different solutions to fix the Nighthawk app conflicts with mobile app issue.
Try Different Solutions
Reboot the Device
- Find the power button on the side.
- Press it and hold down just for a few seconds until the screen goes black. Wait maybe 10 seconds.
- Now you have to let it boot back up, you’ll see the screen flicker, logo shows, then the main dashboard loads in.
Reset is the Last Resort
- Turn it on.
- Use a paperclip or SIM ejector pin.
- You will see a tiny Reset hole at the back of the device.
- Use the pin and press/hold it for about 10–15 seconds. Don’t just tap it — hold it until the screen flashes or the LEDs blink.
- It’ll reboot on its own.
Now after the device turns on again, connect to it again. The defaults will be the same. WiFi name (SSID) and password are printed on the sticker under the battery.
To Log in to the admin page use the Ip address 192.168.1.1 or http://m1login.net and redo your Netgear Nighthawk setup.
The Conclusion
Hope, this blog post have resolved your “Nighthawk app conflicts with mobile app” problem and now you are using the internet to scroll your mobile screen.